Custom 1911 Shop By Appointment only. Please Give us a Call

R M R Mounting on your 1911

WITH CO-WITNESSED SIGHTS

YOU HAVE THE OPTION WITH OR WITHOUT FIXED SIGHTS WHEN IT COMES TO YOUR NEW RMR. MOST DEFENSIVE HANDGUNS WILL NOT REQUIRE THE FIXED SIGHTS TO BE A VERY EFFECTIVE SIDEARM

RMR'S ARE FAST TO ACQUIRE THE TARGET. RMR'S ARE GREAT FOR OLDER EYES....

MOST COMPANIES OFFER A BATTERY LIFE OF ABOUT ONE YEAR BEFORE REPLACEMENT IS NECESSARY

MAKE SURE YOUR GETTING WHAT YOU WANT OUT OF YOUR 1911

THE 1911 GUYS ARE YOUR FULL SERVICE CUSTOM SHOP.

What is A Case Harden Finish

THE CASE IS THE OUTER LAYER OF THE STEEL. WHEN COMPLETED THE CASE CAN BE UP TO 10 POINTS HARDER THAN THE CORE OF THE STEEL.

THIS WILL PRODUCE A VERY DURABLE FINISH WITH GREATER WARE RESISTANCE AS COMPARED TO THE ORIGINAL STEEL USE TO MAKE YOUR 1911

CARBONIZING IS THE PROCESS OF ADDING FREE CARBON INTO THE STEEL DURING A HIGH TEMPERATURE CONTROLLED PROCESS. IT TAKES SEVERAL HOURS FROM START TO FINISH

FAUX CASE HARDENED FINISH IS ACCOMPLISHED WITH CHEMICALS SUCH AS COLD BLUE, WATER AND SUPER GLUE. YEP YOU READ THAT RIGHT....... IT PRODUCES A NICE FINISH BUT MUST BE SEALED IN CERAKOTE CLEAR TO PROVIDE ANY WARE PROTECTION. OTHER WISE IT WILL COME OFF VERY EASY.

THE 1911 GUYS USE ELECTRIC KILN TO CONTROL THE REAL CASE HARDENING PROCESS.

THIS IS ONLY FOR CARBON STEEL 1911'S

1911 FAILURE TO FEED ARE EASY TO FIX

# 1 PROBLEM IS YOUR GRIP

THE (LIMP WRIST) IS THE FAILURE TO CONTROL THE RECOIL RESULTING IN  A TIMING ISSUE AND FAILURE TO FEED. SO GET A GOOD GRIP . TWO HANDS ARE BETTER THAN ONE.  THERE IS A LOT OF GREAT PROFESSIONAL INSTRUCTION VIDEO ON LINE. START YOUR RESEARCH AND BECOME A BETTER SHOOTER.

TIMING

THE SLIDE MUST RECOIL FULLY IN A TIME THAT ALLOWS THE MAGAZINE SPRING TO PUSH UP THE NEXT ROUND. IF YOUR SLIDE IS TO FAST YOU GET A FEED PROBLEM. IF YOUR SLIDE IS TO SLOW YOU GET A FEED PROBLEM. OFTEN THE WRONG PARTS WERE INSTALLED BY THE PREVIOUS OWNER OR THE FIREARM WAS MODIFIED..

GET HELP WITH 1911 FEEDING PROBLEMS

THE 1911 GUYS ARE EXPERT AT DIAGNOSING YOUR 1911 PROBLEMS. GIVE US A CALL FOR HELP. 

TARGET SIGHTS

ADJUSTABLE JUST FOR THE SHOOTER

PICTURED IS A BOMAR STYLE REAR SIGHT. MOST 1911 DO NOT COME STANDARD WITH THIS GREAT TARGET STYLE SIGHT. THEY ARE TYPICALLY INSTALLED BY A GUNSMITH, BUT A LOT OF GREAT SHOOTERS HAVE THE TOOLS AT HOME.

THEY ARE THE BEST SIGHTS FOR TARGET SHOOTING

YOU CAN SEE THE ADJUSTMENT SCREWS BOTH ARE EASY TO ADJUST AT THE RANGE . YOU WILL GET ON TARGET AND START PRINTING SMALLER GROUPS WITH THIS TYPE OF SIGHT SYSTEM

WHERE DO WE GET OURS FROM

THE GREAT FOLKS AT FUSION FIREARMS CAN HELP. WWW.FUSIONFIREARMS.COM



custom 1911 Firearms 1911 gunsmith

image2

What Will Makes Your 1911 A Great Firearm

We start off with a Face to Face Consultation in our shop. We will take down your 1911 right in front of you and describe in detail the problems as we discover them. 

We Will Make Recommendation

We will provide you with on the spot recommendation and the cost to improve your 1911.

Proven Upgrades that work

Over the years The 1911 Guys have developed several methods to smooth out your action, set the Trigger to what you would like it to be (Target only firearms can be set below 3.5 lbs) We can fix all your feeding problems.

You Want Accuracy

There are three critical points in the 1911 that effect accuracy. We will show you where there are and how we improve them. You want tight groups let us show you how.

Full Rebuild

If you have an old worn out 1911 that rattles like pebbles in a pop can. We can fix it with a full restoration all the way to full firearm refinishing .....how about a new two tone look .....

Customer Service and Warranty

It matters to us,  if we work on your firearm it is covered for a lifetime. We will make repairs and adjustments anytime. You will become part of The 1911Guys Family